Double Sided Tape Roll with Red Liner

Double Sided Tape is a practical adhesive consumable for joining compatible surfaces during fixing, assembly and craft work. The product shown is supplied as a wound roll with a red release liner and a light-coloured central core.

The roll format lets you prepare a suitable section for the area you want to join. Choose the tape according to the materials, available bonding area and requirements of the task rather than relying on appearance alone.

Table of Contents

1. Product Overview
2. Key Features
3. Product Details
4. Choosing a Suitable Application
5. Preparation and Application
6. Handling and Storage
7. Frequently Asked Questions

Double Sided Tape: Product Overview

This product is identified as double-sided tape, with a red liner visible around the wound layers. The release liner protects the covered adhesive surface before application.

The red appearance shown in the photograph refers to the liner. It does not establish the colour or transparency of the adhesive after the liner is removed.

The supplied photograph shows the roll from above. Width, thickness, adhesive composition and total length cannot be reliably determined from that view, so check the selected product specifications before ordering.

Key Features

• Double-sided adhesive format: Intended to join compatible surfaces with tape between them.
• Roll presentation: Allows sections to be prepared for the required work area.
• Red release liner: Helps distinguish the protected side before application.
• Central core: Keeps the unused tape organised in its wound form.
• Cut-to-size use: Can be prepared for a suitable application using an appropriate cutting tool.
• Workbench consumable: Can be stored alongside other fixing and assembly supplies.

Product Details

Choosing a Suitable Application

General Assembly

Consider Double Sided Tape for joining compatible parts where an adhesive layer is appropriate. Check the required strength, contact area and material compatibility before committing to the final assembly.

Craft and Display Work

The tape can be considered for suitable craft materials or lightweight display components after testing. Painted, coated, textured and delicate surfaces may react differently, so assess a small inconspicuous area first.

Repair Workbench Tasks

Keep the roll available for tasks that specifically call for a matching double-sided adhesive. It should not automatically replace a manufacturer-specified seal, gasket or pre-cut adhesive.

Mobile Repair Applications

Before using Double Sided Tape in a phone assembly, confirm the required width, thickness and adhesive type. The supplied image does not establish suitability for every screen, back panel or internal component.

Preparation and Application

Start by checking the instructions for both the tape and the surfaces being joined. Prepare a clean, dry bonding area and remove contamination using a method suitable for the material.

Measure the area before cutting. Avoid placing adhesive over openings, moving parts, contacts or other sections that must remain clear.

Apply the first side carefully while keeping the remaining liner in place. Align the second component before removing the liner, then join the surfaces and apply pressure as directed by the product instructions.

Keep fingers away from exposed adhesive where possible. Handling the adhesive surface can introduce contamination and affect the finished bond.

Allow any specified bonding time before putting the assembly into service. Do not assume immediate full strength, repositionability or residue-free removal unless the product documentation confirms it.

Handling and Storage

Keep unused Double Sided Tape protected by its liner and store the roll in a clean, dry location. Prevent dust from collecting along the exposed edges.

Avoid crushing the roll or storing it beside excessive heat. Follow any storage-temperature and shelf-life instructions provided with the product.

This listing does not claim a specific load rating, waterproof performance, electrical insulation, heat resistance or damage-free removal. Select an adhesive with documented properties when those requirements matter.

For general consumer information, visit the Bureau of Indian Standards. This informational link does not indicate certification of this tape.

Visit Great Choice to browse mobile repair tools, spare parts and accessories.